Philips 5900 user manual Detailed View TCP/IP Network WLAN, Basic Installation Wired & Wireless

Basic Installation (Wired & Wireless)

7.To access the WLAN settings page, click Admin Network Settings

Detailed View TCP/IP Network WLAN

WLAN Parameters Refer to the table below for a description of the WLAN parameter settings used to configure the Axis Network Print Server for wireless printing.

WLAN Parameters	Description
	The WLAN node address that is identical to the Axis Network Print
	Server serial number which is found on the underside label on the print
WLAN Node Address	server, e.g.
	Ser.No: 00:40:8C:10:00:86
	WLAN Node Address: 00 40 8C 10 00 86
WLAN Network Speed	Select the appropriate network speed according to your network
	environment or select Auto Sense
	Select Ad Hoc mode for peer to peer printing or Infrastructure mode for
	wireless communication via an access point.
WLAN Network Mode	Note: The WLAN Network Mode must match the mode of the
	workstation / laptop. This is set using the computer’s wireless
	configuration software.
	The default SSID (service set identifier) in the Axis Network Print Server
	is ’AXIS’ followed by the last six digits of the serial number, e.g.
WLAN SSID	AXIS100086
	Note: the SSID must match the SSID of the WLAN network interface.
	This is set using the computer’s wireless configuration software.
WLAN Channel	The default setting is channel 11 (Japan = channel 14) See “Technical
	Specifications” on page 138 for more information
WLAN Fragmentation Threshold	These parameters are used to optimize the data transmission in
	accordance with the IEEE 802.11b standard.
WLAN RTS Threshold

24 AXIS 5900 User’s Manual