
Accessing Local Management
NOTE |
The User’s password is one of the community names specified in the SNMP Community Names screen. Access to certain Local Management capabilities depends on the degree of access given to the specific community name. Refer to Section 5.8.
If an invalid password is entered, the terminal beeps and the cursor returns to the beginning of the password entry field.
Entering a valid password causes the associated access level to display at the bottom of the screen and the Main Menu screen to display.
If no activity occurs for several minutes, the Password screen displays and the session ends.
5.4.1Navigating Local Management Screens
The
The
•802.1D SWITCHING (IEEE 802.1D switching)
•802.1Q SWITCHING (802.1Q port based VLANs)
•SECURE FAST VLAN (Cabletron Systems SecureFast Switching)
NOTE |
Refer to the Release Notes shipped with the product to verify which screens are supported in each of the three available switching modes.
The switch operational mode may be set in either the Chassis Configuration screen (Section 5.7), or the General Configuration screen of the module (Section 5.15). Depending on the Operational Mode set for the module, the hierarchy of Local Management screens differs as shown in Figure
|