Chapter 5: Local Management
5.4ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Password screen, Figure 5-3. Whenever a connection is made to the 6H122-16 the Password screen displays. Before continuing, the user must enter a password which is compared to the previously stored passwords. The level of access allowed the user depends on the password. To set or change passwords refer to Section 5.8. The following steps describe the procedure to access Local Management.
1.Turn on the terminal. Press ENTER (this may take up to four times, because the COM port of the 6H122-16 auto-senses the baud rate of the terminal) until the 6C105 Local Management Password screen, Figure 5-3, displays.
6C105 LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603)332-9400
(c)Copyright CABLETRON Systems, Inc. 1998
Enter Password:
Event Message Line
2361_12
Figure 5-3 The Local Management Password Screen
2.Enter the Password and press ENTER. The default Super-User access password is “public” or press ENTER.
