Samsung RF268AB Removing The Freezer Accessories, Tilting Pocket, Ice Bucket, Freezer Drawer Bin

Models: RF268AB

1 84
Download 84 pages 60.62 Kb
Page 31
Image 31
REMOVING THE FREEZER ACCESSORIES

REMOVING THE FREEZER ACCESSORIES

1. Tilting Pocket

To remove - Pull both brackets( 1 ) upward until you hear a clicking sound and remove the pocket

To replace - Hook the ends of the pocket into both brackets ( 1 )

and push down until it locks into place.

opera02

 

 

1

ting

2. ICE BUCKET

 

1

 

To remove

- Lift the ice bucket( 1 ).

2

 

 

 

To relocate - Place the ice bucket into the Super extended drawer(

 

 

 

2 ).

 

 

3. Auto Pull Out Drawer

 

 

To remove

- Pull the drawer out to full extension.

 

 

 

Tilt up the rear of the drawer and lift straight out.

3

 

To relocate - Place the drawer onto the rails( 4 ) by tilting it up.

 

 

 

Lower the drawer into place until it is horizontal and

 

4

 

slide the Drawer( 3 ) in.

 

 

 

 

4. Freezer Drawer Bin

To remove the drawer - Pull the drawer out fully. Tilt up the rear of the bin and lift it out to remove.

To relocate the drawer - Place the bin into the rail assembly.

To remove the divider - Pull the divider straight up.

1

 

To relocate the divider - Hook the top corners of divider( 1 )

2

over the hole of the bin( 2 ).

 

Do not allow a baby or children to go inside the drawer bin.

CAUTION They could damage the Refrigerator and seriously injure themselves. Do not sit on the Freezer door. The door may

break. Do not allow children to climb into the Freezer basket.

If you remove the divider to clean the basket bin, you must

WARNING reinstall the divider using 2 screws after cleaning to prevent children from getting trapped inside the basket.

Operating _31

Page 31
Image 31
Samsung RF268AB Removing The Freezer Accessories, Tilting Pocket, Ice Bucket, Auto Pull Out Drawer, Freezer Drawer Bin