SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

1.Place the Refrigerator in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual.

2.Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3.Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled and the motor will run smoothly.

4.After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the Refrigerator after the temperature is sufficiently cool.

Check the accessories listed below.

PU ESTTING01

Water filter

Hex wrench

Fastener

Compression fitting

Compression nut

Clip fitting lock(red)

Required Tools (Not provided)

Philips screwdriver(+)

Flat-blade screwdriver(-)

Socket wrench (7/16”)

Pliers

Allen wrench(3/16”)

REMOVING THE REFRIGERATOR DOORS

Some installations require door removal to transport the Refrigerator to its final location.

Do not remove the door/drawer if it is not needed. Before removing the door/drawer, make sure you read following items.

WARNING Disconnect power to the Refrigerator before removing the door or drawer.

Be careful not to drop, damage or scratch the door/drawer while removing them.

Be careful not to get injured while removing the door/drawer.

Reattach the door/drawer properly to avoid:

-Moisture from air leakage.

-Uneven door alignment.

-Wasting energy due to improper door seal.

Disassemble the Refrigerator doors

Be careful not to drop and scratch the doors while removing the WARNING doors.

Disassemble the Refrigerator doors

1.With the door opened, remove the cap top table ( 1 ) with a flat-blade screwdriver(-), and close the door.

Remove the 3 screws holding down the top table ( 2 ) and remove it.

2

1

Setting up _9

Page 9
Image 9
Samsung RF268AB Setting UP the Refrigerator, Removing the Refrigerator Doors, Disassemble the Refrigerator doors

RF268AB specifications

The Samsung RF268AB is a standout model in the realm of French door refrigerators, offering an array of features that combine style with functionality. This refrigerator is designed to accommodate modern lifestyles, providing ample storage space and advanced technologies that enhance food preservation.

One of the key highlights of the RF268AB is its spacious interior, which features a total capacity of 26 cubic feet, allowing users to store groceries and perishables effortlessly. The refrigerator compartment is equipped with adjustable shelving, freezer storage, and crispers that keep fruits and vegetables fresh longer. Furthermore, the counter-depth design of the RF268AB provides a sleek, built-in look, allowing it to blend seamlessly into any kitchen décor.

Energy efficiency is another major feature that defines the Samsung RF268AB. With Energy Star certification, it is designed to consume less energy compared to traditional models, helping households reduce their carbon footprint while saving on utility bills. The appliance uses LED lighting, which not only illuminates the entire interior but also consumes less energy and lasts longer than conventional bulbs.

The refrigerator is equipped with Samsung's Twin Cooling System, a technology that uses independent cooling systems for the refrigerator and freezer compartments. This ensures that humidity levels remain optimal, preventing odor transfer between the two sections and keeping food fresher for longer periods of time. Additionally, the system prevents freezer burn, which is a common issue in many refrigerators.

Another impressive feature of the RF268AB is the external water and ice dispenser, offering convenience at your fingertips. Users can enjoy chilled filtered water and ice without having to open the refrigerator door, which helps maintain the ideal temperature inside. The dispenser is designed to accommodate larger containers, allowing for easy filling of pitchers and bottles.

Furthermore, this model incorporates a digital display panel that allows users to adjust temperatures and settings with ease. With its sleek, stainless steel finish, the RF268AB is not only functional but also adds a touch of modern elegance to the kitchen.

In summary, the Samsung RF268AB combines ample storage space with advanced cooling technology and energy efficiency. Its user-friendly features, stylish design, and high-performance capabilities make it a highly sought-after refrigerator, catering to the needs of contemporary households while ensuring food freshness and convenience.