Chapter 5: Local Management
NOTE |
All passwords assigned in the 6C105 SNMP Community Names screen allow access to both the 6C105 Local Management screens, and the Local Management screens of the interface modules that are installed in the chassis. To configure the interface module to disallow access to the 6C105 Local Management screens, refer to Section 5.16.
To establish community names, proceed as follows:
1.Use the arrow keys to highlight the Community Name field adjacent to the selected access level.
2.Enter the password in the field (maximum 31 characters).
3.Press ENTER.
4.Repeat steps 1 through 3 to modify the other community names.
5.Use the arrow keys to highlight SAVE at the bottom of the screen and press ENTER. The message “SAVED OK” displays. The community names are saved to memory and their access modes implemented.
5.9SNMP TRAPS SCREEN
Since the 6C105 is an SNMP compliant device, it can send messages to multiple Network Management Stations to alert users of status changes. The SNMP Traps screen is shown in Figure
To access the SNMP Traps screen from the Chassis Menu screen, use the arrow keys to highlight the SNMP TRAPS menu item and press ENTER. The Chassis SNMP Traps screen displays.
|
