Cabletron Systems 6H122-16 manual Setting the Chassis Time

Chapter 5: Local Management

3.Press ENTER to set the system calendar to the date in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the date entered is a valid format, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, Local Management does not alter the current value, but it does refresh the Chassis Date field with the previous value.

NOTE

Upon saving the new chassis date, all interface modules installed in the chassis recognize the new value as the current date.

5.7.4Setting the Chassis Time

To set the chassis clock, perform the following steps:

1.Use the arrow keys to highlight the Chassis Time field.

2.Enter the time in a 24-hour format: HH:MM:SS

NOTE

When entering the time in the Chassis Time field, separators between hours, minutes, and seconds do not need to be added as long as each entry uses two numeric characters. For example, to set the time to 6:45 A.M., type “064500” in the Chassis Time field.

3.Press ENTER to set the system clock to the time in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the time entered is a valid format, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, Local Management does not alter the current value and refreshes the Chassis Time field with the previous value.

NOTE

Upon saving the new chassis time, all interface modules installed in the chassis recognize the new value as the current time.

5-20 6H122-16 User’s Guide