Cabletron Systems 6H122-16 manual Setting the Module Time

Chapter 5: Local Management

3.Press ENTER to set the system calendar to the date in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the date entered is a valid format, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, Local Management does not alter the current value, but it does refresh the Module Date field with the previous value.

5.15.6 Setting the Module Time

To set the module clock, perform the following steps:

NOTE

If the 6C105 chassis has been assigned a chassis time, it is not necessary to assign a module time to the 6H122-16. All installed modules recognize the chassis time of the 6C105.

1.Use the arrow keys to highlight the Module Time field.

2.Enter the time in 24-hour format: HH:MM:SS

NOTE

When entering the time in the system time field, separators between hours, minutes, and seconds do not need to be added as long as each entry uses two numeric characters. For example, to set the time to 6:45 A.M., type “064500” in the Module Time field.

3.Press ENTER to set the system clock to the time in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the time entered is a valid format, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, Local Management does not alter the current value and refreshes the Module Time field with the previous value.

5-48 6H122-16 User’s Guide