9.2.Reassembly Instructions
9.2.1.Attention when
•Please execute writing BIOS ID when you exchange the Main Board.
•You cannot reuse the Conductive Clothes and the heat dissipating parts such as Sheet and Rubber. Use new parts.
9.2.2.Setting the MAIN HIGH PCB
Note:
After replacing the Main Board, rewrite the BIOS ID.
1.Set the MAIN HIGH PCB to the computer.
2.Fix the MAIN HIGH PCB using the two Screws <N1>. No.1, No.2
3.Fix the MAIN HIGH PCB using the two Screws <N4>. No.3 to No.6
4.Fix the MAIN HIGH PCB using the two Screws <N13>.
5.Connect the Battery Cable to the Connector (CN42).
Battery cable
<N4>
:No.5
CN4
MAIN HIGH PCB
<N13> | <N4> |
|
| :No.6 | :No.4 |
| <N4> | |
|
| :No.3 |
<N1>
:No.1
:No.2
Screw <N1> : DFHE5035ZB
Screw <N4> : DRHM0093ZA
Screw <N13> : DXYN2+F12FNL
Screws <N9>: DFHE5025XA
