9.2.22. Setting the Display Unit, BIOS HIGH PCB and SW LED MDC PCB

1. Set the Display Unit to the computer, and fix it using the four Screws <N4>. No.1 to No.4

<N4> <N4> :No.2 :No.1

Display unit

<N4> <N4> :No.4 :No.3

2.Connect the Cable(gray) to JK7001 and the Cable(blue) to JK7003 on WWAN PCB.

3.Set the BIOS HIGH PCB, and fix it using the two Screws<N2>. No.1, No.2

4.Connect the Cable(black) to JK6103 and the Cable(white) to JK6102 on BIOS HIGH PCB.

Speaker holder

<N2>:No.2

<N2>:No.1

Cable (black)

Cable (white) BIOS HIGH PCB

5.Connect the two Cables to the Connector(CN5 and CN35).

Cables

CN5 CN35

9-38

Page 61
Image 61
Matsushita CF-52AJYZDZM service manual Setting the Display Unit, Bios High PCB and SW LED MDC PCB