Matsushita CF-52AJYZDZM Removing the Modem, Speaker R, Speaker L, Removing the Keyboard

9.1.11.Removing the Modem

1.Disconnect the Cable from the Connecor(CN4200).

2.Remove the two Screws <N2>, and remove the Modem.

<N2>

Cable Modem

CN4200

SW LED MDC PCB

3.Remove the Tape1, Conductive tape-modem and Tape2, disconnect the Cable from Modem

9.1.12.2. Speaker R

1.Remove the Speaker Holder R, and remove the Speaker

R

9.1.12.3. Speaker L

1. Remove the Tape, and remove the Speaker L.

9.1.13. Removing the Keyboard

1.Remove the two Tapes.

2.Lift the upper part of the Keyboard and draw it backward, and then turn the Keyboard over forward.

Keyboard

Tape

Cable

Conductive tape-modem

Tape 2

Tape 1

Tape

Note:

Take extreme care when peeling off the tape as it is strongly sticked.

3.Remove the four Screws <N2>, and remove the Key- board Lid Plate.

4.Disconnect the two FPC from the two Connectors (KBD FPC).

Screws <N2> : DFHE5122YA

9.1.12.Removing the SW LED MDC PCB and Speakers

9.1.12.1. SW LED MDC PCB

1.Disconnect the Cables from the Connectors(CN4202 and CN4203), and remove SW LED MDC PCB.

Speaker

L

Tape

Speaker holder R

Cable

CN4202

CN4203Speaker

Cable R

	<N2>
	<N2>
<N2>	Key board lid plate
	<N2>
	Connectors

FPC KBD FPC

5.Remove the Keyboard. Screws <N2> : DFHE5122YA

9-6