Matsushita CF-52AJYZDZM Removing the Hinge Support L and MP Hold Plate, SC Relay PCB

9.1.23. Removing the Hinge Support L and MP Hold Plate

1.Peel off the three Tapes and remove the two Cables(Gray and Blue).

2.Remove the six Screws <N4>, remove the Hinge Support L and MP Hold Plate.

Cables	<N4>
(Gray and
<N4> Blue)	<N4>
Hinge	Tapes
support L
<N4>
<N4>
<N4>
MP hold
plate

Screw <N4> : DRHM0093ZA

9.1.24. Removing the Battery Connector Ass’y

1.Remove the two Screws <N2> and <N4>, and remove the Battery Connector Ass’y.

2.Remove the two Screws <N6>, and remove the Batt FPC Plate.

3.Remove the two Screws <N5>, and remove the Batt Con Holder from the FPC Batt.

Screw <N5> : DRHM0112ZA

Screw <N6> : DRHM0115ZA

9.1.25. Removing the SC RELAY PCB and HDD Hold Plate

1.Disconnect the FFC from the Connector(CN6503).

2.Remove the two Screws <N2>, and remove the SC RELAY PCB.

3.Remove the two Screws <N4>, and remove the HDD Hold Plate.

	SC RELAY PCB
HDD hold plate	<N2>

<N4>

CN6503 <N4>

Tape

FFC

Screw <N2> : DFHE5122YA

Screw <N4> : DRHM0093ZA

9.1.26. Removing the Heat Sink Ass’y

1.Remove the Fan Duct.

2.Remove the four Screws <K138>, and remove the Heat Sink Ass’y.

<N4>	<N6>
Batt FPC plate		<N4>
	<N5>	<N2>
		FPC batt
Batt con holder

<K138>

Fan duct

<K138>

Heat sink ass'y

Screw <N2> : DFHE5122YA	Screw <K138> : DRHM0119ZAT
Screw <N4> : DRHM0093ZA
	9-10