9.1.14. Removing the Top Cover
1.Remove the Gasket.
2.Remove the Screws <N2>, <N4>, <N9> and ten Screws <N14>
Screws <N12> : DXSB2+4FNLT
Screws <N14> : XTB26+10GJKT
9.1.15. Removing the Pad and TOUCH PAD PCB
<N14>
<N14>
<N4>
Gasket <N14>
1.Remove the six Screws <N12>.
2.Remove the Top Relay Plate and Pad Holder.
3.Remove the Pad and TOUCH PAD PCB.
<N2>
<N14>
<N14>
<N9>
<N14> 
Top relay plate
Pad holder
<N12>
<N12>
<N14>
3.Turn the unit to the face, remove the Screw <N12> and five Screws <N8>.
4.Remove the WP Sheet and Tape, and remove the Screw <N12>.
5.Remove the two Screw Sheets.
Remove the two Screws <N9>, and remove the Cover BT.
Remove the Screw <N2> and disconnect the Cable from the BT UNIT PCB, and remove it.
6.Disconnect the FFC and KBD FPC from the Connec- tors(CN23 and CN22), and lift up the Top Cover Ass’y and remove it.
|
| Screw |
|
|
WP sheet |
| sheet | <N9> | |
|
| |||
Tape |
| <N9> |
| Cover |
|
| BT | ||
|
| <N2> |
| <N2> |
Top cover ass'y | <N8> |
|
| |
<N8> |
| BT UNIT | ||
|
| <N12> | <N8> | |
|
| PCB | ||
FFC
CN23 | KBD FPC |
CN22 |
TOUCH PAD
PCB
Pad
Screws <N12> : DXSB2+4FNLT
9.1.16. Removing the SD PCB
1.Remove the two Screws <N12>.
2.Disconnect the FFC from the Connector(CN4300), and remove the SD PCB.
<N12><N12>
CN4300
SD PCB
FFC
Screws <N2> : DFHE5122YA | Screws <N12> : DXSB2+4FNLT |
Screw <N4> : DRHM0093ZA |
|
Screws <N8> : DRHM5054XAT |
|
Screws <N9> : DRHM5104ZAT |
|
