9.1.20. Removing the KBD Earth Plate
1. Remove the Tape in the direction of arrow.
TapeFFC
CN34
9.1.21. Removing the Hinge Support R
1.Peel off the Tape and remove the Screw <N4>.
2.Disconnect the Cable from the Connector (CN7).
3.Turn the Cover PC Card down in the direction of arrow, and remove the Hinge Support R.
Tape
<N4>
2.Remove the four Screws <N4> and two Screws <N13>, and remove the KBD Earth Plate.
Hinge support R
<N13>
KBD EARTH
PLATE
<N4>
CN7 | Cover PC card |
|
<N4>
Screw <N4> : DRHM0093ZA
Screw <N13> : DXYN2+F12FNL
Screw <N4> : DRHM0093ZA
9.1.22. Removing the Fan Ass’y
1.Disconnect the Cable from the Connector(CN18).
2.Remove the two Screws <N4>, and remove the Fan Ass’y.
3.Remove the three Screws <N12>, and remove the Fan.
4.Remove the three Screws <N2>, and remove the Fan Case Plate.
<N12> 
<N12> 
<N12>
Fan
<N4>
Fan case
Fan case plate
<N2> 
<N2>
Screw <N2> : DFHE5122YA
Screw <N4> : DRHM0093ZA
Screw <N12> : DXSB2+4FNLT
