|
| Contents |
5.15 | General Configuration Screen | |
| 5.15.1 Setting the IP Address | |
| 5.15.2 Setting the Subnet Mask | |
| 5.15.3 Setting the Default Gateway | |
| 5.15.4 Setting the TFTP Gateway IP Address | |
| 5.15.5 Setting the Module Date | |
| 5.15.6 Setting the Module Time | |
| 5.15.7 Entering a New Screen Refresh Time | |
| 5.15.8 Setting the Screen Lockout Time | |
| 5.15.9 Setting the Operational Mode | |
| 5.15.10 Setting the Management Mode | |
| 5.15.11 Configuring the COM Port | |
| 5.15.12 Changing the Com Port Application | |
| 5.15.13 Clearing NVRAM | |
| 5.15.14 Enabling/Disabling IP Fragmentation | |
5.16 | SNMP Community Names Screen | |
| 5.16.1 Establishing Community Names | |
5.17 | SNMP Traps Screen | |
| 5.17.1 Configuring the Trap Table | |
5.18 | Switch Configuration Screen | |
| 5.18.1 Setting the STA | |
| 5.18.2 Setting the Age Time | |
| 5.18.3 Setting (Enabling or Disabling) the Port Status | |
5.19 | Ethernet Interface Configuration | |
| 5.19.1 Configuring the Ports | |
| 5.19.2 Setting the Operational Mode | |
| 5.19.3 Setting the Advertised Ability | |
| 5.19.4 Setting the Flow Control Admin Status | |
5.20 | Module Specific Configuration Menu Screen | |
5.21 | System Resources Screen | |
| 5.21.1 Setting the Reset Peak Utilization | |
5.22 | Flash Download Screen | |
| 5.22.1 Image File Download Using TFTP | |
| 5.22.2 Image File Download Using RUNTIME | |
| 5.22.3 Image File Download Using BootP | |
5.23 | Port Redirect Function Screen | |
| 5.23.1 Changing Source and Destination Ports | |
5.24 | Broadcast Suppression Screen | |
| 5.24.1 Setting the Threshold | |
| 5.24.2 Setting the Reset Peak Switch | |
5.25 | Module Statistics Menu Screen |
| ix |