Cabletron Systems 6H122-16 Entering a New Screen Refresh Time, Setting the Screen Lockout Time

Chassis Configuration Screen

5.7.5Entering a New Screen Refresh Time

The screen refresh time is set from 3 to 99 seconds with a default of 3 seconds. To set a new screen refresh time, perform the following steps:

1.Use the arrow keys to highlight the Screen Refresh Time field.

2.Enter a number from 3 to 99.

3.Press ENTER to set the refresh time to the time entered in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the time entered is within the 3 to 99 seconds range, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, the Event Message Line displays “PERMISSIBLE RANGE: 3...99” momentarily. Local Management does not alter the current setting, but it does refresh the Screen Refresh Time field with the previous value.

5.7.6Setting the Screen Lockout Time

The screen lockout time can be set from 1 to 30 minutes with a default of

15 minutes. To set a new lockout time, perform the following steps:

1.Use the arrow keys to highlight the Screen Lockout Time field.

2.Enter a number from 1 to 30.

3.Press ENTER to set the lockout time in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the time entered is within the 1 to 30 minutes range, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, the Event Message Line displays “PERMISSIBLE RANGE: 1...30” momentarily. Local Management does not alter the current setting, but it does refresh the Screen Lockout Time field with the previous value.

6H122-16 User’s Guide 5-21