|
|
|
|
| SNMP Traps Screen |
|
|
|
|
|
|
| Event Message Line |
|
| ||
|
|
|
| 6C105 LOCAL MANAGEMENT |
|
|
|
|
| Chassis SNMP Traps |
|
|
| Trap Destination | Trap Community Name | Enable Traps | |
|
|
|
| public | [NO] |
|
| 0.0.0.0 |
| ||
| 0.0.0.0 |
| public | [NO] | |
| 0.0.0.0 |
| public | [NO] | |
| 0.0.0.0 |
| public | [NO] | |
| 0.0.0.0 |
| public | [NO] | |
| 0.0.0.0 |
| public | [NO] | |
| 0.0.0.0 |
| public | [NO] | |
| 0.0.0.0 |
| public | [NO] | |
|
| SAVE | EXIT | RETURN | |
|
|
|
|
|
|
Figure 5-12 Chassis SNMP Traps Screen
The following explains each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to eight different destinations can be defined.
Trap Community Name (Modifiable)
Displays the Community Name included in the trap message sent to the Network Management Station with the associated IP address.
Enable Traps (Toggle)
Enables transmission of the traps to the network management station with the associated IP address. This field toggles between YES and NO.
|
