Kenwood TH-KAE, TH-K4AT, TH-K2ET, TH-K2AT Selecting a Tone Frequency, Press MENU

3Press [MENU].

4Turn the Tuning control to select “TONE”.

5Press [MENU] to store the setting or [PTT] to cancel.

6Press any key other than [LAMP], [MONI/SQL], and [MENU] to exit Menu Mode.

• “T” appears when the Tone function is ON.

Note: You cannot use the Tone and CTCSS/ DCS functions at the same time. Switching the Tone function ON after activating the CTCSS/ DCS deactivates the CTCSS/ DCS function.

TH-K2E/ ET/ K4E only: When you access repeaters that require a 1750 Hz tone, you do not need to activate the Tone function. Simply press [CALL] without pressing [PTT] switch to transmit a 1750 Hz tone (default setting).

■Selecting a Tone Frequency

1 Press [MENU].

2 Turn the Tuning control to select Menu No. 3 (T). 3 Press [MENU].

4 Turn the Tuning control to select the desired tone frequency.

5 Press [MENU] to store the setting or [PTT] to cancel.

6 Press any key other than [LAMP], [MONI/SQL], and [MENU] to exit Menu Mode.

35