■Direct Frequency Entry (TH-K2AT/ ET/ K4AT only)
In addition to turning the Tuning control, there is another way to select the frequency. When the desired frequency is far away from the current frequency, you can directly enter a frequency using the numeric keypad.
1Press [VFO].
•You must be in the VFO Mode to make the direct frequency entry.
2Press [#].
3Press the numeric keys ([0] to [9]) to enter your desired frequency. [
] allows you to complete the MHz digits entry.
•Pressing [#] fills all remaining digits (the digits you did not enter) with 0 and completes the entry. For example, to select 145.000 MHz, press [1], [4], [5] and press [#] to complete the entry.
•If you want to revise the MHz digits only, leaving the kHz digits as they are, press [VFO] in place of [#].
Example 1
To enter 145.750 MHz:
Key in | Display |
[#] | – – – – – – |
[1], [4], [5] | 1 4 5. – – – |
[7], [5], [0] | 1 4 5. 7 5 0 |
21
