Kenwood TH-KAE, TH-K4AT, TH-K2ET, TH-K2AT instruction manual DCS Code ID Scan

DCS Code ID Scan

This function scans through all DCS codes to identify the incoming DCS code on the received signal. You may find this useful when you cannot recall the DCS code that the other persons in your group are using.

1Press [MENU] and turn the Tuning control to select Menu No. 5 (DCS).

2Press [MENU] (1 s) to start the DCS Code ID Scan function.

•While scanning, the decimal point between “DCS” and the DCS code blinks.

•To reverse the scan direction, turn the Tuning control.

•To quit the function, press [PTT].

•When a DCS code is identified, the identified DCS code appears and blinks.

3Press [MENU] to program the identified DCS code in place of the current DCS code. Otherwise, press [PTT] to exit the DCS Code ID Scan.

•Turn the Tuning control while the identified DCS code is blinking to resume scanning.

Note:

◆Received signals are monitored through the speaker while scanning is in progress.

◆DCS Code ID Scan does not scan the code if a signal is not detected.

75