| : | High battery power |
| : | Medium battery power |
| : | Low battery power |
No display | : | Recharge or replace the batteries. |
3Release [PTT] to exit.
Note: You may not be able to transmit at high power (“” position) if the battery remaining indicator shows low battery power.
BATTERY SAVER
The Battery Saver extends the operating time of the transceiver. It automatically activates when the squelch is closed and no key is pressed for more than 10 seconds. To reduce battery consumption, this function shuts the receiver circuit OFF for the programmed time, then momentarily turn it back ON to detect a signal.
To program the receiver
1Press [MENU].
2Turn the Tuning control to select Menu No. 16 (SAV).
3Press [MENU].
4Turn the Tuning control to select the receiver shut- off period from OFF, 0.2, 0.4, 0.6, 0.8, 1.0 (default), 2.0, 3.0, 4.0, and 5.0 seconds.
5Press [MENU] to store the setting or [PTT] to cancel.
Note:
◆The longer the
◆When the CTCSS/ DCS code matches during reception, the battery saver function is turned OFF.
84