Kenwood TH-K2AT, TH-KAE, TH-K4AT, TH-K2ET instruction manual 1Press MENU

•The upper limit frequency blinks.

7Turn the Tuning control to select the upper limit frequency in MHz.

8Press [MENU] to store the upper limit frequency or [PTT] to cancel.

Note:

◆You cannot program the 100 kHz or lower digits.

◆The upper limit frequency cannot be set lower than the selected lower limit frequency.

TIME-OUT TIMER

The Time-out Timer limits the time of each transmission. The built-in Time-out Timer limits each transmission time to a maximum of 3, 5 or 10 (default) minutes. Just before the transceiver stops the transmission, a warning beep sounds. This function is necessary to protect the transceiver from thermal damage and can therefore not be turned OFF.

1Press [MENU].

2Turn the Tuning control to select Menu No. 23 (TOT).

3Press [MENU].

4Turn the Tuning control to select “3”, “5” or “10” (default) minutes.

5Press [MENU] to store the setting or [PTT] to cancel.

94