Kenwood TH-K2ET, TH-KAE, TH-K4AT, TH-K2AT 1Press MR to recall your desired memory channel

Note:

◆Call Channel data cannot be cleared.

◆You can also clear the Priority Channel, L0/U0 ~ L2/U2 and Weather Alert data.

◆While the trasceiver is in Channel Display Mode or Lock function is activated, you cannot clear the channel data.

◆To clear all memory channels contents at once, perform Full Reset {page 111}.

NAMING A MEMORY CHANNEL

You can name memory channels using up to 6 alphanumeric characters. When you recall a named memory channel, its name appears on the display in place of the stored frequency. Names can be call signs, repeater names, cities, names of people, etc. In order to use the Memory Name function, the memory channel capacity must be set to 50 channels. To change the memory channel capacity from 100 to 50, access Menu No. 13 (M.CH) {page 41}.

1Press [MR] to recall your desired memory channel.

2Press [MENU] to enter Menu Mode.

3Turn the Tuning control to select Menu No. 14 (M.NAME).

4Press [MENU].

• A blinking cursor appears.

5Turn the Tuning control to select a desired alphanumeric character.

48