MICROPROCESSOR RESET
If your transceiver seems to be malfunctioning, resetting the microprocessor may solve the problem. The following 2 reset Modes are available. When performing the reset, you may lose memory data and stored information. Back up or write down important data before performing the reset.
Initial Settings
The factory defaults for the operating frequencies are as follows:
•TH-K2AT/ E/ ET: 144.000 MHz
• | 430.000 MHz |
The Memory channels have no data stored. The Weather Radio frequency (AL channel) is restored as 162.550 MHz
Full Reset
This resets all transceiver parameters to the factory default values.
VFO Reset
This resets the transceiver parameters excluding the stored DTMF Number in Memory {page 77} and memory channel contents.
Note: While transceiver is operating in the Channel Display Mode {page 57}, you cannot reset the transceiver.
111