Kenwood TH-K4AT, TH-KAE, TH-K2ET, TH-K2AT Programming an Offset, Selecting an Offset Direction

OFFSET PROGRAMMING FLOW

qSelect a receive frequency.

wSelect an offset direction.

eSelect an offset frequency

(only when programming odd-split repeater frequencies).

rActivate the Tone function (if necessary).

tSelect a tone frequency (if necessary).

If you store all the above data in a memory channel, you will not need to reprogram the parameters every time. Refer to “MEMORY CHANNELS” {page 41}.

Programming an Offset

You must first select an amateur radio repeater downlink frequency as described in “Selecting an Offset Frequency” {page 33}.

■Selecting an Offset Direction

Select whether the transmission frequency will be higher (+) or lower (–) than the reception frequency.

32