Kenwood TH-K2ET, TH-KAE, TH-K4AT •Time-OperatedMode default, Carrier-OperatedMode, •Seek Mode

SCAN RESUME METHOD

The transceiver stops scanning at the frequency (or memory channel) where a signal is detected. It then continues or stops scanning according to which Resume Mode you have selected.

•Time-Operated Mode (default)

The transceiver remains on a busy frequency (or memory channel) for approximately 5 seconds, then continues to scan even if the signal is still present.

•Carrier-Operated Mode

The transceiver remains on a busy frequency (or memory channel) until the signal drops out. There is

a2-second delay between signal dropout and scan resumption.

•Seek Mode

The transceiver moves to a frequency or memory channel where a signal is present and stops.

To change the scan resume method:

1Press [MENU].

2Turn the Tuning control to select Menu No. 11 (SCAN).

3Press [MENU].

4Turn the Tuning control to select “TO” (Time-Operated), “CO” (Carrier-Operated), or “SE” (Seek) Mode.

5Press [MENU] to store the new setting. Otherwise, press [PTT] to cancel.

68