Kenwood TH-K2AT, TH-KAE, TH-K4AT, TH-K2ET instruction manual 6Press MENU

•You can enter the following alphanumeric characters: 0 ~ 9, A ~ Z, – (hyphen), / (slash), and a space.

•Press [MONI/SQL] to delete the character at the current cursor position.

6Press [MENU].

•The cursor moves to the next digit.

7Repeat steps 5 and 6 to enter up to 6 digits.

•To complete the entry, press [MENU] without selecting a character.

•Press [MONI/SQL] to delete a character.

•Press any key other than [MONI/SQL], [MENU], and [LAMP] to cancel the entry.

After storing a Memory name, the Memory name appears in place of the operating frequency. However, you can still display the operating frequency, if desired. To display the frequency rather than Memory name, access Menu No. 15 (MDF) and select “FRQ”. This menu toggles the display mode between the Memory name (“MN”) and frequency display (“FRQ”).

Note:

◆You cannot name the Call Channel {page 53}.

◆You cannot assign a Memory name to a channel that does not contain data.

◆You can overwrite stored names by repeating steps 1 to 7.

◆The stored name is erased when you clear the Memory channel data.

49