JVC LVT1007-010A[A] Press and hold VCR 2.Press VCR, Release VCR, For VCR, Manufacturer, Codes

To change the transmittable signals for operating another manufacturer’s VCR

1.Press and hold VCR .

2.Press VCR.

3.Enter manufacturer’s code using buttons 1–9,

and 0.

See the list on the right column to find the code.

4. Release VCR .

The following buttons can be used for operating a VCR:

VCR : Turn on and off a VCR.

After pressing VCR, you can perform the following operations on a VCR:

CH +/–:Change the TV channels on a VCR.

1 – 10/0, 0, 100+ (+10):

	Select the TV channels.
	The 10/0 button will function as the ENTER
	button if your VCR requires pressing ENTER
	after selecting a channel number.
3:	Start playback.
REW:	Rewind a tape.

FF:Fast wind a tape.

7:Stop playing or recording.

8:Pause playing. To resume, press 3.

REC PAUSE: Enter recording pause by pressing this button. To start recording again, press this button then 3.

5. Try to operate your VCR by pressing VCR .

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

	For VCR
Manufacturer	Codes
JVC	00*, 26, 27, 28, 29, 58
Aiwa	01, 02
Bell & Howell	03
Blaupunkt	04, 05
CGM	06, 07
Emerson	08, 10, 11, 12, 64, 65
Fisher	03, 14, 15, 16, 17
Funai	01
GE	18, 19, 20
Goldstar	07
Goodmans	13, 21
Grundig	06, 22
Hitachi	18, 23, 24, 25, 66
Loewe	07, 21
Magnavox	04, 19, 24
Mitsubishi	30, 31, 32, 33, 34, 35
NEC	26, 27
Nokia	03, 36
Nordmende	38
Orion	09
Panasonic	19, 24, 39, 40
Philips	04, 19, 21, 24, 41, 42
Phonola	21
RCA/Proscan	04, 18, 19, 23, 24, 43, 44, 45
SABA	38, 46
Samsung	45, 47, 59, 61, 62, 63
Sanyo	03, 48, 49
Sharp	37, 50
Siemens	03, 51
Sony	52, 53, 54
Telefunken	55, 60
Toshiba	43, 44
Zenith	56, 57

*Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

47