Compu Link Remote Control System

The COMPU LINK remote control system allows you to operate JVC’s audio components through the remote sensor on the receiver.

To use this remote control system, you need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see below) in addition to the connections using cables with RCA pin plugs (see page 10).

•Make sure that the AC power cords of these components are unplugged before connection. Plug the AC power cords only after all connections are complete.

CD player

Cassette deck

CD recorder

COMPU LINK-4

(SYNCHRO)

Notes:

•There are four versions of COMPU LINK remote control system. This receiver is equipped with the fourth version—COMPU LINK-4. This version is added systematic operations with the CD recorder to the previous version—COMPU LINK-3.

•If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components.

•To operate the target component using the COMPU LINK remote control system, set the source name correctly if required.

(See page 19.)

•Refer also to the manuals supplied with your audio components.

This remote control system allows you to use four functions listed below.

Remote Control through the Remote Sensor on the Receiver

You can control the connected audio components through the remote sensor on the receiver using this remote control. Aim the remote control directly at the remote sensor on the receiver. For details, see pages 42 and 43.

Automatic Source Selection

When you press the play (3) button on a connected component or on its own remote control, the receiver automatically turns on and changes the source to the component. On the other hand, if you select a new source on the receiver or on the remote control, the selected component begins playing immediately.

In both cases, the previously selected source continues playing without sound for a few seconds.

•You cannot use the COMPU LINK remote control system to operate the MD recorder.

Automatic Power On/Off (Standby)—only possible with the COMPU LINK-3 and COMPU LINK-4

The connected components turn on and off (standby) along with the receiver.

When you turn on the receiver, one of the connected components will turn on automatically, depending on which component has been previously selected.

When you turn off the receiver, the connected components will turn off (standby).

Synchronized Recording

Synchronized recording means the cassette deck starts recording as soon as a CD begins playing.

To use synchronized recording, follow these steps:

1.Put a tape in the cassette deck , and a disc in the CD player.

2.Press the record (¶) button and the pause (8)

button on the cassette deck at the same time.

This puts the cassette deck into recording pause.

If you do not press the record (¶) button and pause (8) button at the same time, the synchronized recording feature will not operate.

3. Press the play (3) button on the CD player.

The source changes on the receiver, and as soon as play starts, the cassette deck starts recording. When the play ends, the cassette deck enters recording pause, and stops about 4 seconds later.

Notes:

•During synchronized recording, the selected source cannot be changed.

•If the power of any component is shut off during synchronized recording, the COMPU LINK remote control system may not operate properly. In this case, you must start again from the beginning.

LVT1007-010A[A] specifications

The JVC LVT1007-010A[A] is a versatile and high-performing soundbar that has gained attention for its robust features and excellent sound quality. Designed to enhance the home entertainment experience, this soundbar seamlessly integrates with various audio and video devices, making it a suitable choice for both casual viewers and hardcore audiophiles.

One of the standout features of the JVC LVT1007-010A[A] is its impressive audio output. The soundbar boasts a powerful amplification system combined with high-quality drivers that produce clear, rich sound across a wide frequency range. This feature ensures that dialogue in movies is crisp and intelligible while providing deep bass for action sequences and music. The built-in subwoofer further enhances the low-end performance, delivering immersive sound that fills the room.

In terms of connectivity, the LVT1007-010A[A] offers multiple options for seamless integration with other devices. It includes HDMI ARC support, allowing users to connect their TV with a single cable for both audio and control functions. Additionally, the soundbar features optical and AUX inputs, making it compatible with various audio sources, including gaming consoles, Blu-ray players, and streaming devices. Bluetooth connectivity is also a highlight, enabling users to stream music directly from their smartphones or tablets effortlessly.

Another significant characteristic of the JVC LVT1007-010A[A] is its sleek and modern design. The soundbar features a slim profile that can easily fit in front of most TVs without obstructing the screen. Its minimalist aesthetics and high-quality finish make it an attractive addition to any living room setup.

The soundbar also comes equipped with several sound modes and presets, allowing users to customize their listening experience based on content type. Whether watching movies, gaming, or enjoying music, users can switch between modes to optimize sound performance. Furthermore, the remote control provided simplifies operation, enabling users to adjust settings without getting up.

Overall, the JVC LVT1007-010A[A] stands out as a dynamic soundbar that delivers a compelling audio experience. Its combination of powerful sound, diverse connectivity options, and stylish design makes it a worthy investment for those looking to elevate their home entertainment systems. Whether you're a movie buff or a music lover, this soundbar is engineered to meet your audio needs.

JVC LVT1007-010A[A] Compu Link Remote Control System, Press the play 3 button on the CD player

Models: LVT1007-010A[A]