JVC LVT1007-010A[A] Press and hold CATV/DBS, Press CATV/DBS CONTROL, Release CATV/DBS, Codes

To change the transmittable signals for operating a CATV converter or DBS tuner

1.Press and hold CATV/DBS .

2.Press CATV/DBS CONTROL.

3 Enter a manufacturer’s code using buttons 1 – 9, and 0.

See the list on the right column to find the code.

4. Release CATV/DBS .

The following buttons can be used for operating a CATV converter and DBS tuner:

CATV/DBS : Turn on and off a CATV converter or DBS tuner.

After pressing CATV/DBS CONTROL, you can perform the following operations on a CATV converter or DBS tuner:

CH +/–:Change the channels.

1 – 10/0, 0, 100+ (+10):

Select the channels.

The 10/0 button will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

5. Try to operate your CATV converter or DBS tuner by pressing CATV/DBS .

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or DBS tuner, try each one until the correct one is entered.

Note:

You cannot preset the signals for both the CATV converter and DBS

tuner at the same time.

	For DBS tuner
Manufacturer			Codes
JVC		56*, 57, 67
Amstrad		43, 44, 45, 46, 47, 48, 49
Blaupunkt		30
Echostar		50, 51, 67
Goldstar		31
Grundig		32, 33
Hirshmann		48, 52, 53, 54, 55
Instrument		68
ITT/NOKIA		34
Kathrein		52, 58, 59, 60, 61, 62, 63
NEC		35, 36
Orbitech		48
Philips		37, 38
RCA		65
Samsung		39, 40
Schwaiger		61, 64
Siemens		41, 42
Sony		66
Technisat		48
			*Initial setting
For CATV converter
Manufacturer			Codes
General Instrument			06, 07, 08, 09, 10, 11,
			12, 13, 14, 29
Hamlin/Regal			01, 02, 03, 04, 05
Jerrold			06, 07, 08, 09, 10, 11,
			12, 13, 14
Oak			15, 16, 17
Panasonic			18, 19, 20
Pioneer			21, 22
Scientific Atlanta			23, 24, 25
Tocom			26
Zenith			27, 28

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

46