JVC LVT1007-010A[A] manual Operating Other Manufacturers’ Video Equipment, Release TV

Operating Other Manufacturers’ Video Equipment

This remote control supplied with the receiver can transmit control signals for other manufacturers’ TVs, CATV converters, DBS tuners, VCRs and DVD players.

When operating the other manufacturers’ components, refer also to the manuals supplied with them.

•After replacing batteries for the remote control, you need to set the manufactures’ codes again.

To change the transmittable signals for operating another manufacturer’s TV

1.Press and hold TV .

2.Press TV/DBS.

3.Enter a manufacturer’s code using buttons 1 – 9,

and 0.

See the list on the right column to find the code.

4. Release TV .

The following buttons can be used for operating a TV:

TV : Turn on and off the TV.

TV VOL +/–:Adjust the volume.

TV/VIDEO: Set the input mode (either TV or VIDEO).

After pressing TV/DBS, you can perform the following operations on a TV:

CH +/–:Change the channels.

1 – 10/0, 0, 100+ (+10):

Select the channels.

The 10/0 button will function as the ENTER button if your TV requires pressing ENTER after selecting a channel number.

Notes:

•All the functions listed above may not be assigned to the buttons for some TVs.

•If you cannot change the channels of some TVs by pressing 10 keys, press CH +/– for changing the channels.

For TV

Manufacturer	Codes	Manufacturer	Codes
JVC	00*, 02, 13,	Quelle	52, 53, 54, 55,
	14, 47, 74		56, 57, 58, 59,
Akai	01, 02		60, 61, 62, 63,
Blaupunkt	03, 04		64, 65, 66, 67
Fisher	01, 05	RCA/	08, 24, 29, 30,
Grundig	03, 06, 07	Proscan	31, 48
Hitachi	08, 09, 10, 49	SABA	32, 33, 68, 69,
Irradio	02		70
ITT/NOKIA	11, 12	Samsung	06, 08, 16, 34,
Loewe	06, 15, 16		35, 49
Magnavox	08, 17, 49	Sanyo	01, 05
Mets	50, 51, 52, 53	Schneider	02, 15, 36
Mitsubishi	08, 18, 19, 20	Sharp	37, 38, 77
Mivar	21	Sony	39
Nordmende	22, 23	Telefunken	40, 41, 42, 69
Okano	15	Thomson	71, 72
Panasonic	24, 25, 26, 27,	Toshiba	37, 43, 44
	76	Zenith	45, 46
Philips	15, 17, 28, 75

*Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

5. Try to operate your TV by pressing TV .

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

45