JVC LVT1007-010A[A] Press and hold AUDIO 2Press DVD, Release AUDIO, For DVD player, Manufacturer

To change the transmittable signals for operating another manufacturer’s DVD player

1.Press and hold AUDIO .

2Press DVD.

3. Enter a manufacturer’s code using buttons 1–9, and 0.

See the list on the right column to find the code.

4. Release AUDIO .

After pressing DVD or DVD MULTI, you can perform the following operations on a DVD player:

3: Start playing.

4: Return to the beginning of the current (or previous) chapter.

¢: Skip to the beginning of the next chapter.

7: Stop playing.

8: Pause playing. To resume, press 3.

	For DVD player
Manufacturer		Codes
JVC		00*, 02
Denon		01
Panasonic		03
Philips		13
Pioneer		04, 05, 06
RCA		07
Samsung		08
Sony		09
Toshiba		10
Yamaha		11, 12

*Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

After pressing DVD or DVD MULTI, these buttons can be used for the DVD menu operations.

4

Note:

For detailed menu operations, refer to the

instructions supplied with the discs or the

DVD player.

2 3

MENU

56

ENTER

8

5.Try to operate your DVD player by pressing one of the above buttons.

•DO NOT forget to turn on a DVD player before pressing one of the above buttons.

If there are more than one code listed for your brand of

DVD, try each one until the correct one is entered.

48