6-26 Troubleshooting
Error Message during Disk Array Configuration
Refer to the manual that comes with the disk array controller for any trouble on the disk array in
this system.
Problems with Master Control Menu
The master control menu fails to appear:
! Is your system Windows NT 4.0 or later, or Windows 95 or later?
– The CD-ROM Autorun feature is supported by Windows NT 4.0 and Windows 95.
The older versions do not automatically start from the CD-ROM.
! Is Shift pressed?
– Setting the CD-ROM with Shift pressed down cancels the Autorun feature.
! Is the system in the proper state?
– The menu may not appear depending on the system registry setting or the timing to set
the CD-ROM. In such a case, start the Explorer and run \MC\1ST.EXE in the CD-
ROM.