NEC 5800 - page 88

3-4 Configuring Your System
Configuration Examples
The following describes examples of configuration required to use software-link features or for
system operations.
Date and Time
To display system date or time
Select [Main] - [System Time], [System Date].
Link with Management Software
To link with temperature monitoring feature of ESMPRO
Select [Server] - [Temperature Sensor] - [Enabled].
To control power supply of the server with ESMPRO Manager via the network
Select [Advanced] - [Advanced Chipset Control] - [Wake On Lan] - [Enabled].
UPS
To link power supply with the UPS
! To power on the server when power is supply from the UPS
Select [Server] - [After Power Failure] - [Power On].
! To keep the server off-powered even when power is supplied from the UPS if the
POWER switch was used to power off
Select [Server] - [After Power Failure] - [Last State].
! To keep the server off-powered even when power is supplied from the UPS
Select [Server] - [After Power Failure] - [StayOff].