![](/images/backgrounds/112694/bg40.png)
2-6 Setting Up Your System
ASSEMBLING THE RACK-MOUNT SYSTEMThis subsection provides the instructions for mounting the rack-mount server unit into a standard
EIA 19-inch rack cabinet.
This subsection also describes the removal procedures for the rack mount server unit from the 19-
inch rack cabinet.
WARNING
Observe the following instructions to safely use the server. Failure to follow
these instructions may result in death or serious personal injury.
■ Do not use the server in any unauthorized place.
■ Do not connect the ground line to a gas pipe.
CAUTION
Observe the following instructions to safely use the server. Failure to follow
these instructions may cause a fire, personal injury, or property damage.
■ Do not carry or install the server by a single person only.
■ Do not install the server where the load may be concentrated on a specific
point.
■ Do not install any component on the server by a single person only.
■ Do not pull a device out of the rack if the rack is unstable.
■ Do not leave more than one device pulled out from the rack.
■ Do not exceed the power rate of the wiring.