Troubleshooting 6-17
Fail to start the OS:
! Is a floppy disk in the floppy disk drive?
– Take out the floppy disk and restart the server.
! Is the EXPRESSBUILDER CD-ROM in the CD-ROM drive?
– Take out the EXPRESSBUILDER CD-ROM and restart the server.
! Is the OS broken?
– Use recovery process to recover the system. (See "Recovery for Windows
2000/Windows NT System" in this Chapter.)
The event log after every logon to Windows 2000 includes the following error log:
Description (D)
The CPUs in this multiprocessor system are not all the same revision level.
To use all processors the operating system restricts itself to the features of
the least capable processor in the system. Should problems occur with
this system, contact the CPU manufacture to see if this mix of processors
is supported.
! Has the CPU been expanded?
– If the different revision (stepping) of the processor is installed in the multiprocessor
system, Windows 2000 logs the above information every startup. If this message is
logged, it is no problem for operation.
The OS presents unstable operation <Windows 2000/Windows NT>:
! Did you update the system?
– Installing a network drive after installation of the OS may cause unstable operation.
Use the EXPRESSBUILDER CD-ROM to update the system.