Configuring Your System 3-17
Memory ConfigurationSelect "Memory Configuration" on the Advanced menu to display the following screen.See the table below for setup options on the screen.
Option Parameter Description Your Setting
Extended Memory
Test
1 MB
1 KB
Every-Location
[Disabled]
Extended memory test options run during
POST.
1MB: Tests every 1-MB memory.
1KB: Tests every 1-KB memory.
Every-Location: Tests every memory
location.
Disabled: Initializes memory.
Note: the smaller the test unit, the longer
the test takes during POST.
DIMM Bank #1 -
#3
Installed
Disabled
Not Installed
Indicates the current memory status.
"Normal" indicates the normal status,
"Error" indicates a memory error, and
"None" indicates no DIMM installed (view
only).
Bank #1 indicates DIMMs in DIMM socket
#1A and #1B.
Bank #2 indicates DIMMs in DIMM Bank
#2A and #2B.
Bank #3 indicates DIMMs in DIMM Bank
#3A and #3B.
(Memory is interleaved and two DIMMs
are used in pair.)
Memory Retest [Disabled]
Enabled
Clears memory error information and
retests all DIMMs on the next system
boot. This option will be automatically
reset to [Disabled] on the next system
boot.
[ ]: Factory-set