PRODUCT SPECIFICATIONS
Item | Description |
Drive Size | 3/4” Square Drive |
Impact Mechanism | Twin Hammer |
Maximum RPM | 4300 |
Anvil Retainer Type | Hog Ring |
Maximum Torque | 1300 Ft./Lb. |
Blows Per Minute | 960 |
Air Inlet Size | |
Recommended Hose Size | 1/2” Inside Diameter (Not Included) |
Air Consumption | 9.3 SCFM @ 90 PSI |
Overall Dimensions | 12.2” Long x 11/4” Wide x 4.7” High |
Net Weight | 12.5 Lb. |
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure that all the parts and accessories listed on page 8 are included, and the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
SAFETY WARNINGS AND PRECAUTIONS
1.WARNING! Use eye and hearing protection. Always wear ANSI approved safety impact goggles when using this Impact Wrench. Also, wear ANSI approved hearing protection. Other people in the work area must also wear appropriate ANSI approved safety equipment.
2.Keep work area clean. Cluttered areas invite accidents.
3.Stay within air pressure capacity. Never operate the Impact Wrench above 90 PSI.
4.Observe work area conditions. Keep work area well lit. Do not use pneumatic
SKU 95141 | For technical questions, please call | PAGE 2 |
