6.Connect the air supply hose (not included) to the previously installed Quick Connnector of the Impact Wrench. (See Figure C.)
7.Turn on the air compressor, and set its regulator at 90 PSI.
Do not exceed 90 PSI.
8.Wait until the air compressor’s regulator reaches 90 PSI. Then, insert the previously installed socket onto the nut that is to be loosened or tightened.
9.Make sure to hold the Impact Wrench firmly with both hands, as torque from the tool will cause the tool to twist. Then, squeeze the Trigger (27) to turn on the tool. (See Figure C.)
10.While the work is in progress, you may need to change the directional rotation of the tool. To avoid damaging the Impact Wrench, always make sure the tool is at a complete stop before changing the rotational direction.
(See Figure C.)
11.When finished, release the Trigger (27) to stop the Impact Wrench.
(See Figure C.)
12.Turn off the air compressor. Squeeze the Trigger (27) of the Impact Wrench to release any remaining air pressure in the system and tool. Disconnect the tool from its air supply hose. Then, remove the socket from the tool and store the socket in a safe location. (See Figure C.)
13.Make sure to store the Impact Wrench in a clean, dry, safe location out of reach of children and other unauthorized people.
SOCKET
(NOT INCLUDED)
FORWARD/REVERSE VALVE
(21)TRIGGER
(27)
AIR SUPPLY HOSE
(NOT INCLUDED)
FIGURE C
SKU 95141 | For technical questions, please call | PAGE 6 |
