Colour monitor 463V FA

Setting functions in the "Setup Menu" menu

Calling the Setup Menu setting window

Selecting input signal (Input Select)

The monitor can be operated with analogue or digital signals. With this function you can (depending on the graphics card you use) switch over between the analogue and the digital mode.

Setting the language for the OSD menu (Language Select)

You can choose from English (default setting), German, French, Italian and Spanish.

Displaying note on resolution (Resolution Notice)

The optimum resolution for this monitor is 1280 x 1024. With the function activated (ON), a message appears on the screen after approx.

30 seconds if a different resolution has been selected.

Setting position for the OSD menu (OSD Position)

You can shift the OSD menu up, down, to the left or to the right.

Setting display time for the OSD menu (OSD Time Out)

You can select a value from 5 to 60 seconds. If the adjusted time has run out without the settings being saved, the OSD menu is automatically closed.

Mode Message ON/OFF

If this function is enabled (ON) a message will be displayed on the screen after approx. 3 seconds when anther mode or another input has been selected.

Setting background for the OSD menu (OSD Background)

ON = normal setting

OFF = transparent

Activating the factory settings

Activating the factory settings (Memory Recall)

The Auto Processing message is displayed. All settings will be reset without questioning.

16 - English

A26361-K864-Z100-1-5E19

Page 24
Image 24
Siemens 463V FA manual Setting functions in the Setup Menu menu, Activating the factory settings