Siemens 463V FA manual Setting colour temperature and colours

Colour monitor 463V FA

Setting colour temperature and colours

Calling the Color Adjust setting window

Selecting colour temperature (Color Temperature)

The "warmth" of the screen colours is set using the colour temperature. The colour temperature is measured in K (= Kelvin). You can select from 9300 K, 6500 K, 5400 K, 5000 K and Native.

Native = original colour of the LCD display

Setting user-defined colours (User Color)

In the user-defined setting you can change the colour ratios of the basic colours (red, green, blue) as required.

Adjusting the intensity of the grey levels (Gamma correction) (Gamma)

This function allows you to optimise the display of multimedia applications.

Linear = default setting

Emphasize Brighter Level = Bright areas remain bright, dark areas become darker

Emphasize Darker Level = Dark areas remain dark, bright areas become brighter

Setting functions in the "Advanced Menu" menu

Calling the Advanced Menu setting window

Setting scaling (Scaling)

1:1 = full picture size (depending on the resolution)

Fill All = switch on the full-screen mode. The display area is stretched to the full picture size (1,280 pixels, side ratio 5:4). As a result, the display may appear distorted.

Fill Aspect Ratio = Switch on the proportional full-screen mode: The display area is expanded to the maximum picture size while maintaining the side ratio (either full picture width or full picture height).

Adjusting the picture quality in case of interpolation (Sharpness)

This function allows you to set the sharpness of the interpolation filter.

Thus the display can be optimised for pictures or texts.

Displaying the monitor information (Information)

This function allows you to display e.g. the current resolution and refresh rate.

A26361-K864-Z100-1-5E19 English - 15