Siemens manual Colour monitor 463V FA

Colour monitor 463V FA

Having this problem?	Check the following points:
No display (power indicator lights)	Ê Check whether the computer is switched
	on.
	Ê Check whether the data cable for the
	monitor is correctly attached to the monitor
	port on the computer.
	Ê Press any key on the computer keyboard –
	the computer may be in energy saving
	mode.
	Ê Alter the brightness and/or contrast until
	you get a picture.
	Ê Check whether the data cable for the
	monitor is correctly attached to the monitor
	port on the computer.
	Ê Check whether the computer is switched
	on.
	The input signal (horizontal frequency and
	refresh rate) at the displayed input does not
	correspond to the technical monitor data.
	Ê Adjust the video frequency range using the
	computer software (see documentation for
	your computer or your graphics card).
Picture position is not correct	The monitor recognises an undefined mode (see
	"Technical data").
	Ê Press the AUTO \ AUTO button to perform
	the auto-adjustment of the screen.
	Ê Set the picture position with the OSD menu
	(see "Operation of the monitor").
Picture is shaking	Ê Check whether the data cable for the
	monitor is correctly attached to the monitor
	port on the computer.

22 - English A26361-K864-Z100-1-5E19