Siemens 463V FA manual Connecting cables to the monitor

Colour monitor 463V FA

Connecting cables to the monitor

The monitor ports are protected by a cover.

	1		2	3	4
1 =	Cover	3 =	D-SUB connector (ANALOG)
2 =	Connector for the power supply	4 =	DVI-D connector (DIGITAL)

ÊRemove the cover (1).

The data cables provided have plugs for the D-SUB connector or the DVI-D connector on the monitor.

ÊSelect the suitable data cable for your computer.

Digital graphics card with DVI interface:	DVI connector
Graphics card with VGA interface:	D-SUB connector

Information on the computer connections and interfaces is contained in the operating manual for your computer.

ÊConnect one of the D-SUB connectors of the data cable to the D-SUB connector on the monitor (3) and secure the plug-in connection by tightening the safety screws.

i	If you want to use the data cable with DVI-D connector or if you want to connect the
	monitor to a second computer, proceed as follows:
	Ê Connect the DVI-D connector of the data cable to the DVI-D connector on the
	monitor (4) and secure the plug-in connection by tightening the safety screws.
	After switching on the monitor you must select the desired input with the OSD menu (Input
	Select function, see "Changing the monitor settings" chapter).

ÊPlug the power adapter cable into the power connector (2) of the monitor.

ÊFirmly insert the socket with the power cable supplied into the power cable connection of the power adapter and check whether the socket is securely seated.

8 - English A26361-K864-Z100-1-5E19