Siemens 463V FA manual Switching the monitor on/off, Stage Energy-saving mode

Colour monitor 463V FA

Switching the monitor on/off

1 2 3

1 = Buttons for the OSD menu (On-Screen-Display)

2 = Power indicator

3 = Power button

The ON/OFF switch (3) is used for switching the monitor on and off.

The power indicator (2) glows green when the monitor and computer are switched on. The power indicator glows orange when the monitor does not receive a video signal or is in the energy-saving mode. The power indicator goes off when the monitor is switched off.

When you switch the computer system on, you must proceed in the following order:

ÊFirst switch the LCD monitor on with the ON/OFF switch (3).

ÊThen switch on the computer.

i	If your computer has a power management function (energy-saving mode), you should
	read the "Notes on power management" section in this chapter.

Notes on power management

If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect.

Stage	ON	Energy-saving mode
Power indicator	lights green	glows orange
Function	Monitor	Monitor
	operating	is dark
	normally
Power consumption	normal	reduced to < 3 W
	< 60 W

10 - English A26361-K864-Z100-1-5E19