Siemens 463V FA manual Declaration of Conformity, Power cable

Colour monitor 463V FA

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Name:	LCD Monitor
Trade Name:	Fujitsu Siemens Computers
Model Number(s):	463V FA
Name of Responsible Party:	Fujitsu Siemens Computers Inc.
	598 Gibraltar Drive
	Milpitas, CA 95035-6315
	U.S.A.
Contact Person:	Reiner Johannis
Phone No.:	(408) 571-6051
Fax No.:	(408) 571-6196

Power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set.

￿The female/male receptacles of the cord set must meet CEE-22 requirements.

￿The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath or on the insulation of one of the inner conductors.

￿For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used.

￿The cable set must be selected according to the rated current for your device.

Power cable for devices distributed in the US and Canada

In the United States and Canada the cord set must also be UL-listed and CSA-labelled. The voltage rating should be min. 250 volts a.c.

Please consult the following table for the selection criteria for power cables used in the United States and Canada.

Cable type	Size of conductors in cable	Maximum current rating of the device
SJT	18 AWG	10 Amps
	16 AWG	12 Amps
	14 AWG	12 Amps
SVT	18 AWG	10 Amps
	17 AWG	12 Amps

A26361-K864-Z100-1-5E19 English - 5