Gatekeeper Services, Public | Multi-Tech Systems MVP103, 410

Chapter 3 – Related MultiVOIP Setup Parameters

Gatekeeper - Services

The fields of the Services screen are described in the table below.

		Services Screen Definitions
Field Name	Values	Description
GK Defined	Services

Prefix		A prefix that identifies the service.
Description		A description of the service that is accessible by dialing the prefix. See “GK
		Defined Service Types” section on following pages.
Default		For any GK-defined service being used, the user must select either “Default” or
		“Public.” When Default is selected, the service is accessible to all endpoints that
		are not predefined in the zone.
Public		For any GK-defined service being used, the user must select either “Default” or
		“Public.” When Public is selected, the service is accessible to all endpoints that
		are not part of the zone.

Multi-Tech Systems, Inc. Avaya Communication Manager Guide

63

Image 63

Multi-Tech Systems MVP103, 410 manual Gatekeeper Services, Services Screen Definitions, Public

Contents

MultiVOIP Revision Date Description Configuration Guide Contents Introduction Introduction MultiVOIP in Avaya Communication Manager System Configuration Configuration Channel RTP Port Rtcp Port T38 Port Configuration Configuration Bandwidth per Channel Voice Frames per IP Packet Communication Manager MultiVOIP FXS Channels Configuration Configuration Communication Manager MultiVOIP FXO Channels Configuration = Isdn Communication Manager MultiVOIP did Channels Configuration = Isdn Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Regional Parameter Definitions Field Name Values Description Regional Parameters screen Field Name Values Description Regional Parameter Definitions Tone Pair Values Related MultiVOIP Setup Parameters Communication Manager Settings Related MultiVOIP Setup Parameters Version 4 Parameters Voice/Fax Parameters Channel to be configured is selected here Mode Fax FRF 11 T.38 Fax EnableFax Volume Jitter Value Default = Advanced Features Jitter Automatic Auto Disconnect Interface Parameters Related MultiVOIP Setup Parameters FXS Not applicable to FXS interface Dialing Options FXO Interface Parameter Definitions FXO Disconnect On cont’d CID Number Voip Caller ID Case #4 Remote FXS call on H.323 voip system Did Options Policy GK General SettingsGK General Settings Definitions Activity Configuration RAS Parameters GK General Settings Definitions cont’d Gatekeeper Endpoints Command Buttons ID alias of the endpoint originating the call Gatekeeper CallsCurrent Calls Field Definitions Number. a sequential number for identification in the list ID identifies the call with which the message is associated Call Details Field DefinitionsConference ID number CID is a unique non-zero value created Conference will have the same CID Reason associated with the last state of the call Total amount of bandwidth used by the callType of conference request create, invite or join Last reported state of the call Address and port number H.323 alias name used to make the callE164 alias phone number used to make the call An e-mail address used to make the call Options Gatekeeper Network ParametersNetwork Parameter Definitions Field Name Values Description Status Information Line Hunting Information ARQ Call Mode GK-ID Public Gatekeeper ServicesServices Screen Definitions Field Name Values Description GK Defined Services Dynamic Miscellaneous Miscellaneous Comm Mgr Dialing Example #1 a local station-to-station call Remote Configuration Miscellaneous MVP210-AV Rev a MVP130-AV RevMVP130-AV Rev a MVP130-AV-FXS Rev a Miscellaneous Link Management Feature Issues Index Index Coder field FRF11 Gatekeeper Response to field GK General Settings, RAS DID-DPO FXO Trunk Group form fields to set Dtmf Gain Unregister endpoints command Dtmf Gain High Tones