Multi-Tech Systems 410, MVP103 manual = Isdn

Chapter 2 – Configuration

5g. To accommodate the MultiVOIP unit, the following fields in the Communication Manager “Trunk Group – Page 1” form must be set as shown:

Dial Access?	= y
Service Type	= tie
Group Type	= ISDN
Carrier Medium	= IP/H.323

5h. To accommodate the MultiVOIP unit, all of the MultiVOIP’s FXO channels must be listed as trunk- group members in the Communication Manager Trunk Group form (“Change Trunk-Group” dialog box).

For example, if four channels of an MVP810-AV are configured as FXO, four trunk group numbers must be listed, as above.

16 Multi-Tech Systems, Inc. Avaya Communication Manager Guide