Multi-Tech Systems MVP103, 410 manual = Isdn

Chapter 2 - Configuration

6f. To accommodate the MultiVOIP unit, the following fields in the Communication Manager “Trunk Group – Page 1” form must be set as shown:

Dial Access?	= n
Service Type	= tie
Group Type	= ISDN
Carrier Medium	= IP/H.323

6g. To accommodate the MultiVOIP unit, all of the MultiVOIP’s DID channels must be listed as trunk- group members in the Communication Manager Trunk Group form (“Change Trunk-Group” dialog box).

For example, if four channels of an MVP810-AV are configured as DID, four trunk group numbers must be listed, as above.

Multi-Tech Systems, Inc. Avaya Communication Manager Guide 19