Multi-Tech Systems 410, MVP103 manual Regional Parameters screen

Chapter 2 – Configuration

Regional Parameters screen

The main distinguishing feature of the Regional Parameters screen for Avaya Communication Manager MultiVOIPs is the addition of the survivability dial tone.

1.Set the Survivability Tone in the ConfigurationRegional Parameters screen.

2.The Regional Parameters screen will appear. For the country selected, the standard set of frequency pairs will be listed for dial tone, busy tone, ‘unobtainable’ tone (fast busy or trunk busy), and ring tone.

3.In each field, enter the values that fit your particular system. For most applications, it should be sufficient to select the appropriate country/region and leave the settings at their default values.

The Regional Parameters fields are described in the table below.

“Regional Parameter” Definitions

Field Name	Values	Description
Country/	Australia, Central America,	Name of a country or region that uses a certain set of tone pairs
Region	Chile, Europe, France,	for dial tone, ring tone, busy tone, and ‘unobtainable’ tone (fast
	USA, Japan, UK, Custom	busy tone), survivability tone (tone heard briefly, 2 seconds,
	Note:	after going offhook denoting survivable mode of VOIP unit)
	“Survivability” tone	and re-order tone (a tone pattern indicating the need for the
	indicates a special type of	user to hang up the phone). In some cases, the tone-pair scheme
	call-routing redundancy &	denoted by a country name may also be used outside of that
	applies to Comm Mgr	country. The “Custom” option (button) assures that any tone-
	VOIP units only.	pairing scheme worldwide can be accommodated.
Type column	dial tone, ring tone,	Type of telephony tone-pair for which frequency, gain, and
	busy tone, unobtainable	cadence are being presented.
	tone (fast busy),
	survivability tone,
	re-order tone
Frequency 1	freq. in Hertz	Lower frequency of pair.
Frequency 2	freq. in Hertz	Higher frequency of pair.
Gain 1	gain in dB	Amplification factor of lower frequency of pair.
	+3dB to –31dB	This applies to the dial, ring, busy and ‘unobtainable’ tones that
	and “mute” setting	the MultiVOIP outputs as audio to the FXS, FXS, or E&M port.
		Default: -16dB

30 Multi-Tech Systems, Inc. Avaya Communication Manager Guide