Multi-Tech Systems MVP103, 410 manual Configuration

Chapter 2 - Configuration

using a non-Avaya analog telephone. This station must be properly administered in the Audix Voice Mail System for the message waiting feature to work.

2d. Activate the “Caller ID” feature if you have FXS Interface selected and are using an analog telephone with caller ID display. The MultiVOIP will output Caller ID information, if received, between the first and second rings.

2e. Activate “Caller ID” on FXO interfaces if the attached line supports it. The MultiVOIP will capture the Caller ID information, if provided, between the first and second rings and will forward the information to CM.

Note: If the CM customer is operating on CM release 2.0.1 (or newer), remember that for the ‘h323’ specified station, the following CM admin fields must be set appropriately:

a)The ‘Message Waiting’ field must be enabled and set to “led” if this feature is intended to be supported on the MultiVOIPs analog station port.

b)Similarly, the following features must be enabled as desired:

•Switchhook flash

•Call Waiting Indication

•Attendant Call Waiting Indication

Multi-Tech Systems, Inc. Avaya Communication Manager Guide 9